After making a design in the Kniterate software, download the ‘.kc’ file to your preferred folder and rename it ‘command.kc’. Transfer your file to an SD card. To do this, insert the SD card into the SD card slot of your computer or an SD card adapter that is attached to your computer. Copy your file from its folder to the SD card and eject the card when the file is transferred.
Place the SD card in the SD slot on the right-hand side of the LCD menu before turning on the machine. The machine is now ready to read the file. Leave the card in the machine until your knit is completely finished.
If the SD card is not inserted or broken, the screen will let you know briefly before the menu loads that it can’t open the SD card.
Remember: Only the file named exactly “command.kc” will be read.
Select ‘Knit’ by turning the wheel and pressing it to start the file. The carriage will move to its home position (on the far left side) first and then start knitting. Make sure the feeders used are in the right position.