Use this command to copy/cut and paste a specific area of the canvas.
Source Box: Set the selection of the area you want to copy or cut.
- Target Options:
- Choose the desired location for pasting in the grey Target box.
- Determine the alignment by clicking on the Alignment dropdown to access different options.
Mode Dropdown (5 options):
- To target: Pick a target location using the box below.
- By vector: Utilize the shift options to place the selection precisely.
- To side: Position the selection with the assistance of the new dropdown menu and shift options.
- To self: Paste the cut or copied selection in the same place.
- To none: Does not paste. This option only works when the "Cut" box is ticked.
Content options:
- Cut: tick if you want to cut and not copy
- Mirror bed: the selection is copied with a horizontal mirror effect. When it’s pasted, all stitch symbols will be on the opposite needlebed.
- Mirror X: the selection is copied with a vertical mirror effect. When it’s pasted all stitch symbols with a direction attached, like racked transfers, will face the opposite direction.