Robert Ingemarsson

Katy Grieve, and anyone else who is interested, we have replicated the old kCode -> into the new kCode, and have got as far as transfering the first transfer row after the bind off, and whatever we...

Gerard Rubio Cadenzaclothes is using our kcode file which knits perfectly on our machine .  Its a simple bindon, a few lines of knit, then a bind off.  She is using the same tension settings as us ...

Hi some Good news on the positive changes this has made. Our brushes were in that state due to the constant friction. We changed out brushes for the spare pair that came with the machine and have k...

This is how our brushes were before we moved them away And this is the effect it had on the right hand stitches.. With regards to moving the brushes - We found that, with the brush holders as the...

Hi - Those brushes look too close to me - they look like they are touching the feeders which is going to cause you  problems. You can see from our bindon video we have no problems.  The fact that i...

Hi So, the needles NEED to push through the brushes - This is what opens them so that it all good.   Looking at the first video, I think that it could well be related  to the brushes - If the threa...

This is ours - slightly different - but cant see that being the issue.   Katy Grieve, Jipke Lezwijn what do you think as I know you did some work  What is your tension set at  on the left - Its sh...

That does not look so good... From our experience, that is going to cause problems as the yarn may touch the brushes causing tension issues... 1. Have you confirmed if the yarn is touching the brus...

Thank you so much for sharing - that is soooo cool :):) Have just checked out that site and looked at the patterns.. Cant wait till we have a templating system where we can load and select patterns...

Its amazing the time saved and  much less stress as well having to be there every time the machine needs 'feeding'... We did this in an editor Basically moving the feeders back to the initial start...