
Ariadna Pons
- Total activity 167
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 4
- Subscriptions 78
Articles
Recent activity by Ariadna Pons-
GENERATE SHAPING TRANSFERS
NOTE: The following indications are only for single jersey knits. Other stitch structures may require different handling of the shaping. Depending on what piece of a garment you are working on, you...
-
Software manual v1.0.14
Software manual v1.0.14
-
ADD THE START SEQUENCE (WASTE + CAST ON)
With the Kniterate the waste yarn is necessary, as it helps the knit get to the rollers, which will catch it and provide the necessary pull-down tension to knit. Besides, the waste yarn section at ...
-
Full cardigan
Full cardigan structure using all needles and a 0.5 rack: - 1 row of Knit front & tuck rear - 1 row of Tuck front & knit rear Recommended settings: Stitch size 4-6 Roller 500-600 Download file ...
-
Full needle rib (double jersey)
Full needle rib is created by using both needle beds of a flat-bed knitting machine. It consists of wales of front and rear stitches lying next to each other. In relaxed position you only see the...
-
2x1 Rib
2:1 Rib knitting is effectively alternating between 2 wales of single jersey on the front bed and 1 wales of single jersey on the back bed, but it's not as simple as the 1:1 or the 2:2. If we did...
-
Interlock
Double jersey fabric, also known as Interlock, has the following qualities: No rolling tendency; Both sides of the fabric have the same stitch appearance; Very steady and even; Lower elasticity; G...
-
SETTINGS
Here is a table to serve as a guide to understanding how to set the parameter values. These would be for a 7Nm yarn. STITCH STRUCTURE STITCH SIZE ROLLER SPEED Single Jersey 7-8 450 300-600 ...
-
Needle bar stuck
Here is a video of how you can remove the needle bar when it's not sliding smoothly or stuck: https://drive.google.com/file/d/1_nvgnIRJaVw0DYBHs3CYULzTUGf3nKpr/view
-
Start-up guide
What’s included with the machine? Moving the machine to its final location. Removing the knitted sample Oiling and warming-up Setting up the machine Start knitting 1. What’s included with the m...