Print design

Giuseppina Pomponio

November 05, 2025 20:27

Hello everyone! I'm trying to print this drawing only in the centre not on the whole patch but I'm having problems. Since it's in duplicate and there are 4 colours in the drawing I put the check mark "is jacquard", did I do it right? Can you help me? Should I change the stitch?

https://drive.google.com/file/d/1acwsl-AjF5jkYhljwAm9JaYZjNjtroKP/view?usp=drivesdk

0

• 

  Ariadna Pons

  November 06, 2025 08:35

   

  Hi Giuseppina Pomponio , 

  Whenever you use an image to do jacquard, the backing (reversible or birdseye) is applied all over, even though the motif is only a small part of the whole image.

  If you want the jacquard applied only in the motif area, you'll have to crop the image and add single jersey rows below. In that case the “is jacquard” box must be unchecked to ensure that rear stitches are transferred to the front after the cast-on.

  

  Additionally, you'll have to paint a row of full-needle zigzag at the start of the jacqaurd section to cast on the rear needles.

  

  I hope this answers your question. 

  Let me know if you require further assistance.

   

  0

Please sign in to leave a comment.