Troubleshooting - Loose Part in Transport & Assembly

Martin

August 14, 2024 08:02

Hi,
We had to disassemble the machine into the modules as instructed. When we were reattaching the top part, we discovered that a cord with a part on one end came loose. It’s clear that the part should be attached somewhere—can you tell us where? What is this part that has come loose, and how do I reattach it?

Best
M

0

• 

  Ariadna Pons

  August 14, 2024 10:09

  Hi Martin, 
  thank you for reaching out.
   
  That piece is the shock sensor. Please follow these instructions with the machine always TURNED OFF:
   

  1. Try to locate these magnets under the needle beds by introducing your arm underneath the white tray. If there is not enough space you can remove the white tray by unscrewing the marked bolts (see photo below).

  

  

  
   
  2. The cable needs to go under the black iron structure. 
  
  
   
  I hope this is clarifying enough. Please let me know how it goes.

  0

Please sign in to leave a comment.